Microchip DsPIC30F4012

25 Jun 2012 Comments Off on Microchip DsPIC30F4012

Par admin_fabien_f4ctz dans Uncategorized Tags: , , , , , ,

This is a sample code showing a minimal configuration of a DsPIC30F4012 to get on RE0 a high level (logical 1) of a duration of one cycle at 20MIPS from an external crystal of 5MHz. The aim is to validate a simple design by verifying :

  • The MPU is well powered,
  • Its main oscillator is working and the PLL is well configured.

To do that, one file have to be added to a blank project in MPLABX using C30 or XC16 compilers :

#include <p30fxxxx.h>;

_FOSC(CSW_FSCM_OFF && XT_PLL16);
_FWDT(WDT_OFF);
_FBORPOR(PBOR_OFF && MCLR_EN);
_FGS(CODE_PROT_OFF);
_FICD( ICS_PGD );

int main(void) {
    OSCCONbits.POST = 0b01; // Datasheet page 7-14
    TRISE = 0; // Port E en sortie
    LATE = 0; // Initialisation du port E à 0

    while(1) {
        LATEbits.LATE0 = 1;
        LATEbits.LATE0 = 0;
    }

    return 0;
}

Microchip PIC32MX795F512L

25 Jun 2012 Comments Off on Microchip PIC32MX795F512L

Par admin_fabien_f4ctz dans Uncategorized Tags: , , , , , ,

This is a sample code showing a minimal configuration of a PIC32MX795F512L to get on RA1 a high level (logical 1) of a duration of one cycle at 80MIPS. The aim is to validate a simple design by verifying :

  • The MPU is well powered,
  • Its main oscillator is working and the PLL is well configured.

To do that, two files have to be added to a blank project in MPLABX using C32 or XC32 compilers :

  • main.c
#include "HardwareProfile.h"

void CPUInit(void) {
    SYSTEMConfigPerformance(SYS_FREQ);

    DDPCONbits.JTAGEN = 0;      // Disable JTAG
    DDPCONbits.TROEN = 0;       // Disable trace

    PORTSetPinsDigitalOut(IOPORT_A,BIT_1);
}  

int main(void) {

    CPUInit();

    while(1) {
        mPORTASetBits(BIT_1);
        mPORTAClearBits(BIT_1);
    }  

    return 0;
}
  • HardwareProfile.h
#include <p32xxxx.h>
#include <plib.h>

//////////////////////////////////////////////////////////////////////////////////////////
// Configuration processeur                             //
//                                          //
// Informations disponibles dans le fichier d'aide :                    //
// - hlpPIC32MXConfigSet.chm                                //
// - http://ww1.microchip.com/downloads/en/DeviceDoc/61156G.pdf             //
//     page 165 Section 28.1 - Configuration bits                   //
//////////////////////////////////////////////////////////////////////////////////////////
#pragma config FSRSSEL = PRIORITY_0 // Toutes les interruptions utilisent le shadow register

#pragma config FMIIEN = OFF             // Interface Ethernet en mode RMII pour DP83848
#pragma config FETHIO = OFF             // Configuration alternative des signaux du module Ethernet

#pragma config FCANIO = ON, FUSBIDIO = OFF, FVBUSONIO = OFF     //Autres modules inutilises

#pragma config WDTPS = PS1, FWDTEN = OFF

#pragma config ICESEL = ICS_PGx1, DEBUG = OFF

#pragma config PWP = OFF, BWP = OFF, CP = OFF

////////// Configuration de l'oscillateur pour un quartz de 8MHz externe /////////////////
#pragma config FNOSC = PRIPLL           // Choix de l'oscillateur primaire avec utilisation de la PLL
#pragma config POSCMOD = XT             // Quartz < 10Mhz donc XT
#pragma config OSCIOFNC = ON
#pragma config FPLLIDIV = DIV_2, FPLLMUL = MUL_20, FPLLODIV = DIV_1 // 80Mips
#pragma config UPLLEN = ON, UPLLIDIV = DIV_2                        // PLL USB
#pragma config FSOSCEN = OFF, IESO = OFF, FCKSM = CSDCMD            // Autres parametres de l'oscillateur
#pragma config FPBDIV = DIV_1                                       // Horloge peripherique

//////////////////////////////////////////////////////////////////////////////////////////
// Definitions generiques                               //
//                                          //
//////////////////////////////////////////////////////////////////////////////////////////
#define SYS_FREQ                80000000UL
#define GetPeripheralClock()    (SYS_FREQ/(1 << OSCCONbits.PBDIV))
#define GetInstructionClock()   (SYS_FREQ)

Microchip 12F683

25 Jun 2012 Comments Off on Microchip 12F683

Par admin_fabien_f4ctz dans Uncategorized Tags: , , , , ,

This is a sample code showing a minimal configuration of a PIC12F683 to get on GPIO2 a high level (logical 1) of a duration of one cycle of 500ns (8MHz = 2MIPS on 8bits architecture). The aim is to validate a simple design by verifying :

  • The MPU is well powered,
  • Its main oscillator is working.

To do that, one file have to be added to a blank project in MPLABX using Hi-Tech PICC compilers :

#include <htc.h>

/////////// Bits de configuration : Voir datasheet page 84, 12.1 Configuration bits //////////////
__CONFIG(FCMEN_OFF \
    & IESO_OFF \
    & BOREN_OFF \
    & CPD_OFF \
    & CP_OFF \
    & MCLRE_ON \
    & PWRTE_ON \
    & WDTE_OFF \
    & FOSC_INTOSCIO);

void main(void) {
//// Configuration de l'oscillateur interne (datasheet page 20, 3.2 Oscillator control) //////////
    OSCCONbits.IRCF = 0b111;    // 8Mhz
    OSCCONbits.SCS = 0;     // Configuration de l'horloge systeme
                    // définie par les bits de configuration

///// Configuration de entrees/sorties numeriques ////////////////////////////////////////////////
    ANSELbits.ANS2 = 0;     // GPIO2 est numerique
    TRISIObits.TRISIO2 = 0;     // GPIO2 est une sortie

    while(1) {
        GPIObits.GP2 = 1;
        GPIObits.GP2 = 0;
    }
}